Made in U.S.A.

FEATURES

• Impact resistant polymer construction provides light weight and resists operational abuse
• Spring-loaded flip up sight easily activated from either side or by pressing the top
• Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
• Clamps to most any MIL-STD-1913 Picatinny/STANAG 4694 railed hand guard* and provides the same height-over-bore as standard A2 irons
• Protective wings shield the spring-locking A2 front sight post
• Elevation adjustment tool included, but most aftermarket A2 front sight adjustment tools may be used as well

-Material: Polymer 
-Length Height above Rail, Stowed 0.51 in.  Length, stowed 1.5 in. 
-Weight:  1.2 oz. (34 g) 

ELEVATION ADJUSTMENT
~1.6 MOA (1.886″/100m) per click with a 14.5″ sight radius 
~1.2 MOA (1.367″/100m) per click with a 20″ sight radius 

 *NOTE: Cannot be mounted to a railed gas block due to excess heat issues. Front MBUS must be mounted to a railed fore end on the same plane as the receiver rail. Because of this the sight is also not compatible with MOE Hand Guards.